Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Wiring Systems And Power Management - Component Connector End Views) >> Component Connector End Views >> Stop Lamp Switch

Stop Lamp Switch

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Stop Lamp Switch
GM1835104Courtesy of GENERAL MOTORS CORP.
Stop Lamp Switch

Pin Wire Circuit Function
1 0.5 TN 848 Brake Switch Signal
0.5 TN 848 Brake Switch Signal
2 0.5 BK 850 Ground
3-4 - - Not Used
Connector Part Information 
  • Harness: Body
  • OEM: 12105252
  • Service: 88987863
  • Description: 4-Way F 250 Series 58M (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-2876/10
  • Core/Insulation Crimp: C/B Pin: 1
  • Core/Insulation Crimp: E/G Pin: 2
  • Release Tool/Test Probe: 12094430/J-35616-42 (RD)
scientia non olet · About Mike's Workshop Manuals