Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2009 >> H3 Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Repair Instructions - On Vehicle >> Vehicle Speed Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of VSS Electrical Connector
    GM1302108Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the vehicle speed sensor (VSS) electrical connector (2).
    3. Fig 2: View Of Vehicle Speed Sensor (VSS) With O-Ring Seal - RWD
    GM880951Courtesy of GENERAL MOTORS CORP.
  3. Remove the VSS with O-ring seal.
scientia non olet · About Mike's Workshop Manuals