Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2009 >> H3 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Introduction >> Repair Instructions >> Ignition Lock Cylinder Control Solenoid Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Lock Cylinder Solenoid
    GM1663830Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to SIR Warning .
  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
  2. Remove the steering column shroud. Refer to Steering Column Shroud Replacement .
  3. Remove the ignition lock cylinder solenoid.
scientia non olet · About Mike's Workshop Manuals