Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

    Fig 1: Identifying Tie Rod & Nut
    GM793269Courtesy of GENERAL MOTORS CORP.
  1. Loosen the jam nut on the tie rod (1).
  2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
    3. CAUTION: Refer to Fastener Caution .
  3. Tighten the jam nut on the tie rod.

    Tighten:  Tighten the tie rod jam to 68 N.m (50 lb ft).

  4. Check the toe setting after tightening.
  5. Re-adjust the toe setting if necessary.
scientia non olet · About Mike's Workshop Manuals