Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Hummer
>>
2009
>>
H2 4D Utility Pickup
>>
Repair and Diagnosis
>>
Engine Performance
>>
System
>>
Engine Controls And Fuel - 6.2L - DTC P0010 To DTC P0232
>>
DTC P0010
>>
Conditions for Running the DTC
Conditions for Running the DTC
The ignition switch is in the crank or run position.
The system voltage is between 11-18 volts.
The CMP actuator is command ON.
DTC P0010 runs continuously when the above conditions are met.