Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Windshield Washer Solvent Level Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Level Sensor Arm Hinge
    GM869051Courtesy of GENERAL MOTORS CORP.
  1. Get the level sensor in a horizontal position as shown (1).
    2. Fig 2: Identifying Washer Solvent Container Components
    GM1453811Courtesy of GENERAL MOTORS CORP.
  2. Install the level sensor (6) in the washer solvent container (5). Ensure to reference the locating mark made during removal.
  3. Connect the washer solvent electrical connector.
  4. Install the A/C low pressure switch. Refer to Air Conditioning Cycling Switch Replacement .
  5. Refill the washer solvent container.
  6. Inspect for leaks.
  7. Close the hood.
scientia non olet · About Mike's Workshop Manuals