Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Quarter Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The molded encapsulation surrounding the quarter window is made using PVC plastic materials. Use a specific PVC primer application prior to applying the urethane adhesive bead to the window.
  1. Install the quarter window into the opening. Refer to Adhesive Installation of Encapsulated Stationary Windows .
  2. Install the inside garnish molding. Refer to Body Rear Corner Upper Garnish Molding Replacement .
  3. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  4. Close the liftgate.
scientia non olet · About Mike's Workshop Manuals