Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Wiring Systems And Power Management - Component Connector End Views) >> Component Connector End Views >> Ignition Switch

Ignition Switch

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Switch Connector End View
GM307727Courtesy of GENERAL MOTORS CORP.
Ignition Switch

Pin Wire Circuit Function
1 0.5 WH/RD 4 Ignition Voltage
2 0.5 WH/BK 1740 Battery Positive Voltage
3 0.5 WH/GN 338 Ignition Voltage
4 0.5 WH/BU 1390 Ignition Voltage
5 0.5 WH/YE 1073 Ignition Key Resistor Signal
6 - - Not Used
Connector Part Information 
  • OEM: IL-AG5-6S-S3C1
  • Service: 88987854
  • Description: 6-Way F (GN)