Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Box Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. Refer to Battery Replacement .
    2. Fig 1: View Of Battery Cable Harness Retainer
    GM1313637Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the following from the lower battery box (2):
    • The battery cables harness retainer (3)
    • The engine wiring harness retainer
    3. Fig 2: View Of Lower Battery Box
    GM1313645Courtesy of GENERAL MOTORS CORP.
  3. Lift the lower battery box (2) upward from the battery tray (3).
scientia non olet · About Mike's Workshop Manuals