Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC P0615 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON. Verify that no theft deterrent, or automatic transmission DTCs are set that would cause the ECM to disable engine starting.
  2. Clear the DTCs. Attempt to start the engine. The engine should crank and DTC P0615 should not set.
scientia non olet · About Mike's Workshop Manuals