Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC P0562 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Ignition 1 Signal - ECM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, engine OFF.
Parameter Normal Value:  12.6 Volts
B+ 0.0 Volts 0.0 Volts 12.6 Volts