Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Controls And Fuel - 4.4L - Introduction) >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Cleaner Housing Cover
    GM1614076Courtesy of GENERAL MOTORS CORP.
  1. Install the new air filter element (2).
  2. Assemble the air cleaner cover (1) to the air cleaner housing (3).
    3. NOTE: Refer to Fastener Notice .
  3. Install the air cleaner housing cover screws.

    Tighten:  Tighten the air cleaner housing cover screws to 3 N.m (27 lb in).

    4. Fig 2: Air Cleaner Housing Assembly
    GM1614072Courtesy of GENERAL MOTORS CORP.
  4. Install the air cleaner housing to the vehicle. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About Mike's Workshop Manuals