Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Wiring Systems And Power Management - Introduction) >> Repair Instructions >> Ignition and Start Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ignition Switch & Trim Panel
    GM1466128Courtesy of GENERAL MOTORS CORP.
  1. Locate the switch to the trim panel.
  2. Push the switch securing the locking tabs.
  3. Install the instrument cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .
scientia non olet · About Mike's Workshop Manuals