Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (HVAC System - Automatic) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement .
    2. Fig 1: View Of Recirculation Actuator Electrical Connector
    GM819755Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the recirculation actuator.
    3. Fig 2: Removing/Installing Recirculation Actuator Screws
    GM819756Courtesy of GENERAL MOTORS CORP.
  3. Remove the recirculation actuator screws (1).
  4. Remove the recirculation actuator.
scientia non olet · About Mike's Workshop Manuals