Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Floor Console Electrical Connectors
    GM1442969Courtesy of GENERAL MOTORS CORP.
  1. Connect the 4 console electrical connectors to the instrument panel harness.
  2. Locate the center console to the mounting brackets.
    3. Fig 2: View Of Front Floor Console
    GM1442967Courtesy of GENERAL MOTORS CORP.
  3. Move the driver and passenger front seat in order to access the retaining bolts.
    4. NOTE: Refer to Fastener Notice .
  4. Install the retaining bolts.

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

  5. Install the Upper console trim. Refer to Front Floor Upper Console Trim Plate Replacement .
  6. Install the shifter bezel. Refer to Console Shift Lever Bezel Replacement .
scientia non olet · About Mike's Workshop Manuals