HVAC Control Assembly: Notes
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
The HVAC control assembly is a non-class 2 device that interfaces between the operator and the HVAC system to maintain air temperature and distribution settings. An ignition 3 voltage circuit provides power to the control assembly. The air temperature and mode doors are controlled by cables. The recirculation actuator is electrically controlled. The control assembly does not support the following features:
Air Temperature Description and Operation
| Feature | Availability |
|---|---|
| Afterblow | No |
| Purge | No |
| Personalization | No |
| Actuator Calibration | No |