Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Adjustable Pedal System) >> Repair Instructions >> Accelerator Pedal Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator pedal position sensor electrical connector.
  2. Remove the accelerator mounting nuts from the accelerator bracket.
  3. Remove the accelerator assembly from the vehicle.
scientia non olet · About Mike's Workshop Manuals