Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C0545 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, observe the scan tool Torque Sensor Signal 1 and the Torque Sensor Signal 2 parameters. The reading should be between 0.25-4.75 volts.

scientia non olet · About Mike's Workshop Manuals