Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Positive Cable, Cable Clips, Bolts & Nuts
    GM1783030Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Loosen the positive battery cable bolt (5) and remove the positive battery cable from the battery.
    3. Fig 2: View Of Battery And Hold Down Retainer
    GM1578422Courtesy of GENERAL MOTORS CORP.
  3. Remove the battery hold down retainer bolt and retainer.
    4. IMPORTANT: Do not tip the battery more than 40 degrees during removal.
  4. Remove the battery.
scientia non olet · About Mike's Workshop Manuals