Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Introduction >> Repair Instructions >> Ignition Lock Cylinder Solenoid Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Lock Cylinder Solenoid
    GM1663830Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition lock cylinder solenoid.
  2. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About Mike's Workshop Manuals