Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Lighting System) >> Repair Instructions >> Instrument Panel Lamp Dimmer Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Instrument Panel Cluster Trim
    GM1386629Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) cluster trim. Refer to Instrument Cluster Trim Panel Replacement .
    2. Fig 2: Instrument Panel Electrical Connectors
    GM1386636Courtesy of GENERAL MOTORS CORP.
  2. Release the tabs securing the I/P dimmer switch to the trim.
  3. Disconnect the electrical connectors
scientia non olet · About Mike's Workshop Manuals