Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Wiper System & Washer System) >> Repair Instructions >> Windshield Wiper Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wiper Arm & Wiper Arm Blade
    GM1272629Courtesy of GENERAL MOTORS CORP.
  1. Position the wiper blade in the inside radius of the wiper arm hook.
  2. Insert the hook of the wiper arm through the opening in the wiper blade (2).
  3. Pull upward until the locking tab (3) of the pivot engages the slot in the hook.
  4. Carefully lower the wiper arm and blade onto the windshield.
scientia non olet · About Mike's Workshop Manuals