Installation Procedure
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Reconnect the electrical connector.
- Install the amplifier (1) to the sail panel using the fasteners (2)and tighten to 9 N.m (80 lb in).
- Connect the coaxial cable to the amplifier.
- Reinstall the sail panel trim. Refer to Sail Panel Replacement .
NOTE:
Ensure that the module coaxial cable connectors are pointing away from each other.
CAUTION:
Refer to Fastener Caution
.