Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2008 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L - DTC P0010 To DTC P0232 >> DTC P0010 >> Conditions for Setting the DTC

Conditions for Setting the DTC

The ECM detects that the state of the high side driver and the state of the CMP solenoid control circuit does not match. The ECM will detect an open, high resistance, short to ground, or a short to voltage on the CMP solenoid control circuit, or an open on the low reference circuit, if the condition is present for more than 6 seconds.

scientia non olet · About Mike's Workshop Manuals