Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Antilock Brake System And Traction Control System) >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of BPMV & Mounting Bracket
    GM1384684Courtesy of GENERAL MOTORS CORP.
  1. Clean the master cylinder and electronic brake control module (EBCM) assembly with denatured alcohol.
  2. Remove the EBCM assembly from the vehicle. Refer to Electronic Brake Control Module (EBCM) Replacement .
  3. Loosen the mounting bolts for the brake pressure modulator valve (BPMV).
  4. Remove the BPMV from the mounting bracket.
scientia non olet · About Mike's Workshop Manuals