Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Wiper System & Washer System) >> Repair Instructions >> Wiper Motor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wiper motor onto the wiper transmission frame.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts in order to secure the motor to the frame.

    Tighten:  Tighten the wiper motor mounting bolts to 9 N.m (81 lb in).

    3. Fig 1: Installing Transmission Drive Link Socket Onto Crank Arm Ball Using J 39529
    GM429902Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Lubricate the socket with Multi-Purpose Lubricant, Superlube, GM P/N 12346241 (Canadian P/N 10953474) or equivalent.
  3. Install the transmission drive link socket onto the crank arm ball of the wiper motor using the J 39529  . See Special Tools .
    4. Fig 2: View Of Wiper Transmission
    GM1272633Courtesy of GENERAL MOTORS CORP.
  4. Install the wiper transmission (3) to the plenum. Refer to Wiper Transmission Replacement .
scientia non olet · About Mike's Workshop Manuals