Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Disconnect/Connect Procedure >> Connecting Procedure

Connecting Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Cables
    GM1313634Courtesy of GENERAL MOTORS CORP.
  1. Clean any existing corrosion from the battery terminal and battery cable (1) using a wire brush.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Connect the battery negative cable (1) to the battery.

    Tighten:  Tighten the battery cable nut (2) to 9 N.m (80 lb in).

  3. Reset all preset and theft codes previously recorded to the radio.
scientia non olet · About Mike's Workshop Manuals