Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2006 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Computer/Integrating Systems) >> Diagnostic Information and Procedures >> Scan Tool Does Not Communicate with Class 2 Device >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

The engine will not start when there is a total loss of class 2 serial data communication while the ignition is OFF. The following conditions will cause a total loss of class 2 serial data communication: