Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.8L, 5.3L, And 6.0L - DTC P0141 To DTC P0454 >> DTC P0442 >> Circuit/System Testing

Circuit/System Testing

IMPORTANT:
  • Larger volume fuel tanks and/or those with lower fuel levels may require several minutes for the floating indicator to stabilize.
  • Refer to the J 41413-200  operation manual for detailed instructions. See Special Tools .
  1. Connect the J 41413-200  to the vehicle at the EVAP service port. See Special Tools .
  2. Seal the EVAP system and use the flow meter on the J 41413-200  , calibrated to 0. See Special Tools .51 millimeter (0.020 inch) to determine that there is no leak in the EVAP system.
    • If a leak is detected, use the J 41413-200  to apply smoke to the EVAP system at the service port until the leak is located. See Special Tools .
scientia non olet · About Mike's Workshop Manuals