Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Windows >> Repair Instructions >> Quarter Window Replacement (SUT Body Side Window) >> Installation Procedure

Installation Procedure

  1. Install the quarter window into the opening. Refer to Adhesive Installation of Encapsulated Stationary Windows .
    2. Fig 1: Quarter Window
    GM1412544Courtesy of GENERAL MOTORS CORP.
  2. Ensure the pinchweld is primed properly.
  3. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  4. Reposition the midgate window weatherstrip to the pinchweld flange.
  5. Install the rear lock pillar garnish molding. Refer to Lock Pillar Upper Garnish Molding Replacement in Interior Trim.
  6. Close the midgate.
  7. Install the rear header garnish molding. Refer to Roof Rear Header Garnish Molding Replacement in Exterior Trim.
  8. Install the rear sail panel molding. Refer to Sail Panel Molding Replacement (Left Side) in Exterior Trim.
scientia non olet · About Mike's Workshop Manuals