Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 565 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Pedal Stud, Stop Lamp Switch, Pushrod & Retaining Clip
    GM344194Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector from the stop lamp switch (2).
  2. Remove the pushrod retaining clip (4).
  3. Remove the stop lamp switch (2).
scientia non olet · About Mike's Workshop Manuals