Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 565 (Lighting Systems) >> Repair Instructions >> Instrument Panel (I/P) Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Lamp & Base Assembly
    GM397712Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb to the base.
  2. Install the bulb and base assembly into the IPC by turning the bulb 1/2 turn clockwise.
    3. Fig 2: IPC Rear Cover Plate
    GM348651Courtesy of GENERAL MOTORS CORP.
  3. Carefully snap the rear cover plate to the IPC.
  4. Install the IPC. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gauges and Console.
scientia non olet · About Mike's Workshop Manuals