Scan Tool Data List
WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Powertrain Control Module (PCM)
| Scan Tool Parameter |
Data List |
Units Displayed |
Typical Data Value |
| Ignition ON/Engine OFF |
| Ignition 1 Signal |
Engine 1,2 Data |
Volts |
9-14v |
| GEN L-Terminal Signal Command |
Engine 2 Data |
OK/No Output |
OK |
| GEN F-Terminal Signal |
Engine 2 Data |
% |
10-90% |