DTC B2A60-A3: Notes

DTC B2A60-A3  : Power Supply Voltage Too High (Multipurpose Camera Unit)

How to use this manual .

NOTICE:  

• Before you troubleshoot, review the How to Troubleshoot - Refer to: How to Troubleshoot the Lane Keeping Assist System (LKAS) ()  or How to Troubleshoot the Adaptive Cruise Control (ACC) ()  or How to Troubleshoot the Road Departure Mitigation ()  or How to Troubleshoot the Auto High-Beam (High-Beam Support System) () or How to Troubleshoot the Collision Mitigation Braking System (CMBS) () .
• Troubleshoot any DTCs listed or indicated systems below first.
  • PGM-FI System [PGM-FI]: Go to the indicated DTC's troubleshooting .

NOTE: 

• Before starting a troubleshooting, check that a 12 volt battery of a capacity compatible with the vehicle is installed.
• This DTC is stored if the voltage supplied to the multipurpose camera unit exceeds 17 V.