DTC B2A60-99: Notes

DTC B2A60-99  : Out of Automatic Correction Range for Misalignment of Multipurpose Camera Unit Image

How to use this manual .

NOTICE:  

Before you troubleshoot, review the How to Troubleshoot - Refer to: How to Troubleshoot the Lane Keeping Assist System (LKAS) ()  or How to Troubleshoot the Adaptive Cruise Control (ACC) ()  or How to Troubleshoot the Road Departure Mitigation ()  or How to Troubleshoot the Auto High-Beam (High-Beam Support System) () or How to Troubleshoot the Collision Mitigation Braking System (CMBS) () .

NOTE: 

• If this DTC is recorded, the following is suspected:
  • Improper installation of the multipurpose camera unit (aging of vehicle, incorrect assembly, etc.).
  • The multipurpose camera unit bracket is deformed by a minor collision or strong impact.
  • The axis of the multipurpose camera unit is out of alignment due to abnormal wheel alignment, abnormal tire pressure, etc.
  • Altered suspension
• After inspecting, repairing, or adjusting a possible cause of the failure, be sure to perform the multipurpose camera aiming procedure. If the DTC cannot be deleted after multipurpose camera aiming, replace the multipurpose camera unit.