Malfunction Threshold
The transmission fluid pressure sensor D value is in abnormal range against the brake B3 commanded pressure shown in the following table.
| Brake B3 commanded pressure |
Examples of representative transmission control mode |
Transmission fluid pressure sensor D value |
| 11 kPa (0.11 kgf/cm 2, 1.5 psi) or less |
- In Parking
- Steady 1st gear ratio
- Steady 2nd gear ratio
- Steady 3rd gear ratio
|
More than 300 kPa (3.06 kgf/cm 2, 43.5 psi) |
| More than 11 kPa (0.11 kgf/cm 2, 1.5 psi) and line pressure commanded pressure or more |
- Steady 9th gear ratio
- Steady 10th gear ratio
|
Value or more obtained by adding 300 kPa (3.06 kgf/cm 2, 43.5 psi) to the line pressure commanded pressure or value or less obtained by subtracting 300 kPa (3.06 kgf/cm 2, 43.5 psi) from the line pressure commanded pressure when clutch pressure control solenoid valve A, regulator valve, and fluid passage are normal |
| More than 11 kPa (0.11 kgf/cm 2, 1.5 psi) and less than line pressure commanded pressure |
- Downshift from 9th to 8th gear
- Slowed down from 2nd gear and stopped, then shifted to reverse gear
|
More than value obtained by adding 400 kPa (4.08 kgf/cm 2, 58.0 psi) to brake B3 commanded pressure and more than 300 kPa (3.06 kgf/cm 2, 43.5 psi) |