Audio-Navigation System DTC 2706

DTC 2706  : Gyro Diag: ECU Temp XX°C

NOTE: 

• Check the vehicle 12 volt battery condition first .
• This navigation DTC sets when there is a problem with the internal gyro (the Yaw Sensor icon is red in the System Links), and indicates the navigation ECU temperature when the DTC is detected.
• Before you troubleshoot, make sure to follow the General Troubleshooting Information .
• Check any official Honda service website for more service information about the navigation system.

1. Problem verification

   -1. Clear the hard error codes .

   -2. Turn the vehicle to the OFF (LOCK) mode then the ON mode, and wait at least 3 minute.

   -3. Check for hard error codes .

   Is DTC 2706 indicated?

   YES 

   Replace the audio-navigation unit .

   NO 

   Intermittent failure, the system is OK at this time.