DTC P062B (9-Speed A/T)

DTC P062B  : Powertrain Control Module (PCM) Internal Circuit Malfunction

NOTE:  Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems, or How to Troubleshoot the A/T System .

DTC (PGM-FI)

1. Problem verification

   - 1. Turn the vehicle to the ON mode.

   - 2. Clear the DTC with the HDS.

   - 3. Turn the vehicle to the OFF (LOCK) mode.

   - 4. Start the engine.

   - 5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC
   P062B Powertrain Control Module (PCM) Internal Circuit Malfunction

   Is DTC P062B indicated?

   YES 

   The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM - Refer to: PCM Removal and Installation (19-21 9-Speed A/T), or PCM Removal and Installation (6-Speed A/T, 16-18 9-Speed A/T) , then recheck. If DTC P062B goes away and the PCM was substituted, replace the original PCM - Refer to: PCM Removal and Installation (6-Speed A/T, 16-18 9-Speed A/T), or PCM Removal and Installation (19-21 9-Speed A/T) .

   NO 

   Intermittent failure, the system is OK at this time.