| Cruise control cannot be set |
|
- Open circuit, loose or disconnected terminals: PUR or TAN wire between the cruise control combination switch and the gauge control module
- Faulty gauge control module
|
| Cruise control can be set, but the cruise main indicator does not come on |
|
Faulty gauge control module |
| Cruise control can be set, but the cruise control indicator does not come on |
|
Faulty gauge control module |
| Vehicle does not accelerate accordingly when the RES+ button is pressed |
|
|
| Set speed does not cancel when the brake pedal is pressed |
|
- Faulty brake pedal position switch
- An open in the wire between the PCM and the brake pedal position switch
- A wire shorted to ground or power between the PCM and the brake pedal position switch
|
| Set speed does not cancel when the CRUISE/MAIN button is pressed |
|
|
| Set speed does not cancel when the CANCEL button is pressed |
|
|
| Set speed does not resume when the RES+ switch is pressed (with the CRUISE/MAIN switch pressed on, and set speed temporarily canceled by pressing the brake pedal) |
|
|