Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2021 >> Insight EX >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Electric Servo Brake System - Advanced Diagnostics >> Advanced Diagnostics >> DTC C0063-F0

DTC C0063-F0

DTC C0063-F0:  Yaw Rate Sensor Malfunction

NOTE:
  • Initial Diagnosis:

    The initial on-board diagnosis occurs right after the vehicle condition is turned to the ON mode, and the brake system indicator (red or amber) comes on, and continues until the indicator goes off.

  • Regular Diagnosis:

    The regular on-board diagnosis begins right after the brake system indicator (red or amber) goes off, and it continues until the vehicle condition is turned to the OFF (LOCK) mode.

  • Review "How to Troubleshoot the Electric Servo Brake System" before doing the DTC troubleshooting procedure.
  • Test-drive the vehicle according to local traffic conditions and regulations. Do not test-drive on a lift unless specified.
  • The possible causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
Confirmation Procedure Basic Condition:
  • 12 volt battery voltage 9.5 - 16.7 V

Operating Condition:

  • Turn the vehicle to the ON mode.
Execution Regular Diagnosis
Duration About 1 second
DTC Type
  • 1 drive cycle
  • Brake system indicator (amber) on
Fail Safe Action
  • Stop automatic brake hold function (re-diagnose at the next IG-ON)
Possible Cause
  • SRS unit internal failure (Yaw rate-acceleration sensor internal circuit)
scientia non olet · About Mike's Workshop Manuals