Tailgate Release Actuator Test: Test

Without Power Tailgate 

1. Tailgate Lower Trim Panel - Remove
2. Tailgate Release Actuator - Test

   Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC. Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.

   1. Disconnect the connector (A). 2. Check the actuator operation by connecting power and ground according to the table in illustration. NOTE:  To prevent damage to the actuator, apply battery voltage only momentarily. 3. If the actuator does not operate as specified, the tailgate release actuator is faulty; replace the tailgate latch (B).

3. All Removed Parts - Install

   1. Install the parts in the reverse order of removal.