| Cruise control cannot be set |
|
- Open circuit, loose or disconnected terminals: BLU, LT BLU, or WHT wire between the cruise control combination switch and the gauge control module
- Faulty gauge control module
- Faulty cable reel
|
| Cruise control can be set, but the CRUISE MAIN indicator does not come on |
|
Faulty gauge control module |
| Cruise control can be set, but the CRUISE CONTROL indicator does not come on |
|
Faulty gauge control module |
| Vehicle does not accelerate accordingly when the RES+ button is pressed |
|
|
| Set speed does not cancel when the brake pedal is pressed |
|
Faulty brake pedal position switch |
| Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed for more than 5 seconds (M/T) |
|
- Short to ground wire
- Faulty clutch pedal position switch B
- Poor ground G302
|
| Set speed does not cancel when the CRUISE button is pressed |
|
|
| Set speed does not cancel when the CANCEL button is pressed |
|
|
| Set speed does not resume when the RES+ button is pressed (with the CRUISE button pressed on, and set speed temporarily canceled by pressing the brake pedal) |
|
|
| Set speed does not resume when the RES+ button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the clutch pedal) (M/T) |
|
|