DTC P0797 (CVT)

DTC P0797  : Pressure Control Solenoid Valve "C" Stuck ON

NOTE:  Before you troubleshoot, review the General Troubleshooting Information .

DTC (CVT)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. With the brake pedal pressed, do the following operational mode of the shift lever five times:

   -1. Start the engine in P position/mode.

   -2. Shift the transmission to N position/mode, then to D position/mode.

   -3. Shift the transmission to N position/mode, and wait for at least 2 seconds.

   -4. Shift the transmission to D position/mode.

   -4. Turn the engine off. Repeat the shift lever operational mode in step 1-3 five times.

   -5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P0797 Pressure Control Solenoid Valve "C" Stuck ON

   Is DTC P0797 indicated?

   YES 

   The failure is duplicated. Faulty CVT clutch pressure control solenoid valve. Replace the valve body assembly .

   NO 

   Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.