Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2016 >> Civic EX >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System - Advanced Diagnostics >> DTC Advanced Diagnostics >> VSA related DTCs (VSA Control Unit) >> DTC U3000-54: Sensor Calibration is Not Completed

DTC U3000-54: Sensor Calibration is Not Completed

Confirmation Procedure Operating Condition:
  • Start the engine.
  • Test-drive the vehicle at 7 mph (10 km/h) or more for at least 2 seconds.

    (Drive the vehicle on the road, not on a lift. Be careful of the surrounding traffic conditions.)
Execution Initial Diagnosis
Duration About 2 seconds
DTC Type
  • 1 drive cycle
  • Brake system indicator (amber) on
  • VSA indicator on
Fail Safe Action
  • Stop brake assist function
  • Stop TCS function
  • Stop VSA function
  • Stop engine drag torque control function
  • Stop hill start assist function
  • Stop agile handling assist function
  • Stop automatic brake hold function
  • Stop driving support system's brake function
  • Stop drive away assist function
  • Stop emergency brake function
  • Stop ignition OFF apply function* 1

*1: M/T

Possible Cause
  • VSA sensor neutral position not learned
  • VSA modulator-control unit internal failure

*1: M/T

scientia non olet · About Mike's Workshop Manuals