Starting System Symptom Troubleshooting Index

Symptom	Diagnostic procedure	Also check for
Engine does not crank	Without keyless access system: Starter system circuit troubleshooting - Refer to: Starter System Circuit Troubleshooting(Without Keyless Access System) Starter System Circuit Troubleshooting(With Keyless Access System) . With keyless access system: Starter system circuit troubleshooting - Refer to: Starter System Circuit Troubleshooting(Without Keyless Access System) Starter System Circuit Troubleshooting(With Keyless Access System) .	Poor ground at G101 Seized engine
Engine cranks, but does not start	1. Check for PGM-FI DTCs - Refer to: How to Troubleshoot the Fuel and Emissions Systems How to Troubleshoot the CVT System(CVT System) . 2. Check the PGM-FI main relays . 3. Without keyless access system: Check for IMMOBI status and function - Refer to: Immobilizer System Symptom Troubleshooting - Engine does not start with the immobilizer key Immobilizer System Symptom Troubleshooting - Immobilizer indicator does not go off Immobilizer System Symptom Troubleshooting - Immobilizer indicator blinks . 4. With keyless access system: Check for keyless access system symptom troubleshooting information . 5. Check the fuel pressure . 6. Check for a plugged or damaged fuel line . 7. Check for a plugged fuel filter . 8. Check the throttle body . 9. Check for low engine compression . 10. Check the camshaft timing . 11. Do the PCM reset in the PGM-FI System to cancel ALL INJECTORS STOP with the HDS.	Fuel level in tank Weak or fouled spark plugs
Engine is hard to start	Do the symptom troubleshooting for Engine will not start, engine starts but stalls immediately, or engine is hard to start - Refer to: Fuel and Emissions Systems Symptom Troubleshooting - Engine stalls Fuel and Emissions Systems Symptom Troubleshooting - Engine will not start, engine starts but stalls immediately, or engine is hard to start .	Weak or fouled spark plugs
Engine cranks slowly	1. Check for loose 12 volt battery terminals or connections. 2. Test the 12 volt battery for a low state of charge . 3. Check the starter for binding . 4. Check for excessive drag in the engine.