DTC U1281: Power Control Unit Lost Communication With MICU (Keyless Access Power Control Unit)

DTC (Power Control Unit)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   - 2. Press the engine start/stop button to select the OFF mode and then the ON mode.

   - 3. Wait for at least 6 seconds.

   - 4. Check for DTCs with the HDS.

   DTC Description	DTC
   U1281 Power Control Unit Lost Communication With MICU

   Is DTC U1281 indicated?

   YES 

   Go to MICU DTC U1280 troubleshooting .

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.