Immobilizer Code Is Not Identified
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
Immobilizer code is not identified, the immobilizer indicator will flash once, then will blink until the ignition switch is turned to LOCK (0), the indicator will blink ten times, then go OFF to show the system has correctly reset.
The state of the immobilizer key registration and the IMOCD (S-NET) line can be checked by doing SYSTEM CHECK ) and STATUS LOG CHECK (see STATUS LOG ) with the HDS.