Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2015 >> Pilot EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Fuel And Emissions Systems) >> General Troubleshooting Information >> CKP Pattern Clear/CKP Pattern Learn >> Learn Procedure (without the HDS)

Learn Procedure (without the HDS)

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine. Hold the engine speed at 3,000 RPM without load (in P or N) until the radiator fan comes on.
  2. Test-drive the vehicle on a level road: Decelerate (with the throttle fully closed) from an engine speed of 2,500 RPM down to 1,000 RPM with the transmission in 2.
  3. Repeat step  2 several times.
  4. Turn the ignition switch to LOCK (0).
  5. Turn the ignition switch to ON (II), and wait for 30 seconds. The CKP pattern learn procedure is complete.