Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2014 >> Pilot EX-L, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating/Air Conditioning >> Receiver/Dryer Desiccant Replacement

Receiver/Dryer Desiccant Replacement

NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.
  1. Remove the A/C condenser (see A/C CONDENSER REPLACEMENT  ).
  2. Remove the cap (A) from the bottom of the A/C condenser. Remove the O-ring (B) and the desiccant (C).
    Fig 1: Desiccant, O-Ring And Cap Of A/C Condenser With Torque Specifications
    G08090303Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the receiver/dryer in the reverse order of removal, and note these items:
    • Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them. Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.
    • Install the cap to the specified torque. It is made of plastic and can be easily stripped.
scientia non olet · About Mike's Workshop Manuals