Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2014 >> Pilot EX-L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Immobilizer System) >> Immobilizer Key Registration >> Add and Delete Keys/Keyless Transmitters, Then Select Delete or Add Keys

Add and Delete Keys/Keyless Transmitters, Then Select Delete or Add Keys

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Have a registered key, a new immobilizer key, and the first password from the iN system.
  2. Connect the HDS to the data link connector.
  3. Turn the ignition switch to ON (II).
  4. Select IMMOBI from the SYSTEM SELECTION menu, then select IMMOBILIZER SET UP.
  5. Select Add and Delete keys, or Delete or Add Multiple Keys.
  6. Do the registration according to the instruction of HDS screen.
  7. Check if the engine can be started by all the registered keys and if the door locks operate using the immobilizer key transmitter.